Technical Support - Macally BTTOPBAT Guide D'utilisation

Masquer les pouces Voir aussi pour BTTOPBAT:

Guide d'utilisation (17 pages)

Table Des Matières

Table des Matières

Les langues disponibles

Pairing the mouse with Windows PC

1. To connect the Bluetooth mouse to your

computer, bring it within 1 ft/25 cm range from your

computer.

2. In your Windows PC, go to 'Devices and Printers'

and select 'Bluetooth Devices'. Make sure

Bluetooth is On.

3. Then, turn on the mouse, press the pairing

button 2 seconds until the blue light flashes

underneath the DPI switch.

4. Click 'Add a device' at the top left corner (like

shown in the picture).

5. 'Bluetooth Mouse' will appear, please select it

and press 'Next'.

6. After a short period, Windows will show a screen

(like shown) indicating that the mouse is paired with

the computer. You are ready to use the BTTOPBAT.

Pairing the mouse with an iPad/iPhone

1. Open your iPad/iPhone, go to "Settings" and tap

on "Accessibility".

2. In the "Accessibility" screen, tap on "Touch".

3. In the "Touch" screen, tap on "AssistiveTouch"

and turn it on.*

4. Go to the bottom of the "AssistiveTouch" screen

and, under the header "Pointing Devices", tap on

"Devices"

5. In the "Devices" screen, tap on "Bluetooth

Devices..."

6. Bring the Bluetooth mouse within 25 cm (1 ft)

range from your iPad/iPhone, turn it on and press

the pairing button for 1 second until the blue light

flashes underneath the scroll wheel.

7. When "Bluetooth Mouse" shows connected, you

are ready to use the Bluetooth mouse on your

iPad/iPhone

*Enabling "AssistiveTouch" puts a floating, virtual

home button on your screen that you can drag

wherever you want. You can configure the button to

perform four different actions based on whether

you tap, double tap, 3D Touch, or hold it down.

The standard button functions are as follows:

• Left button: Set as single click

• Right button: Set as control plus mouse click

• Scroll wheel: Scroll speed is set as medium

• DPI button: Press the DPI button to change the

sensor resolution (800/1000/1600 DPI) and set the

tracking speed and precision to your preference.

However, if you wish to configure the mouse

settings to your personal preferences you can do

this in the settings of the operating system:

Mac OS

To configure the tracking speed, scrolling speed,

double click speed and primary mouse button, go to

Mouse in System Preferences. To configure the

mouse button functions, go to Mission Control in

System Preferences.

Windows

To configure the mouse buttons, pointer, pointer

options

and

wheel,

Hardware/Control Panel.

Important notes

• To wake up the mouse from sleep mode, click

the mouse button! Do NOT press the pairing

button!

• When you don't use the BTTOPBAT for a longer

period of time, switch it off with the on/off switch on

the bottom of the mouse to conserve the built-in

battery.

• Battery life may vary depending on user and

computing conditions. Fully charged battery lasts

up to 70 hours of use.