Trademarks; Warranty - pico Technology Mixmaster Manuel D'utilisation

Pico Technology
Safety grounding
The Mixmaster connects to the ground of your oscilloscope through its output BNC
connectors. As with most measuring instruments, avoid connecting the input
grounds to any potential other than ground. If in doubt, use a meter to check that
there is no significant AC or DC voltage between the ground of the unit and the
point to which you intend to connect it. Failure to check may cause damage to your
computer, your oscilloscope or your Mixmaster, or lead to injury to yourself and
others.
To ensure reliable grounding, always connect the unit's ground terminal to
the engine block using the 4 mm plug to crocodile clip cable supplied.
Repairs
The Mixmaster contains no user-serviceable parts. Repair of the unit requires
specialised test equipment and must be performed only by Pico Technology.
1.4

Trademarks

Pico Technology Limited and PicoScope are internationally registered
trademarks.
1.5

Warranty

Pico Technology warrants upon delivery, and for a period of 24 months unless
otherwise stated from the date of delivery, that the Goods will be free from defects
in material and workmanship.
Pico Technology shall not be liable for a breach of the warranty if the defect has
been caused by fair wear and tear, wilful damage, negligence, abnormal working
conditions or failure to follow Pico Technology's spoken or written advice on the
storage, installation, commissioning, use or maintenance of the Goods or (if no
advice has been given) good trade practice; or if the Customer alters or repairs
such Goods without the written consent of Pico Technology.
DO120-3
Mixmaster User's Guide
3