GYS SPOT LIFT PRO Mode D'emploi page 18

MADE IN FRANCE
The jack lowers itself when the joys-
tick is in its initial position.
The products stops while doing
down.
DEACTIVATION
Any equipment that appears damaged in any way, does not operate normally, or is missing parts should be taken out
of service immediately by removing the air connection from the control box. Do not use the unit if you notice parts are
broken, bent or cracked.
START-UP
The jack must be disposed of in accordance with current environmental and country disposal guidelines.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
18
SPOT LIFT PRO
Check that airchambers are not
breached.
Leak inside the pneumatic circuit.
There are obstacles between scissors
of the machine.
Changing the inner tubes
Check the air circuit, connections
between cylinders and fittings.
Tighten if necessary.
Remove the obstacle.
EN