AudioSonic RD-8520 Mode D'emploi page 8

Alarm
• There are three independent alarms - 2 alarms of an absolute time setting (Alarm
1 and Alarm 2) and 1 alarm for a relative time setting (Alarm NAP). Press Alarm on
the remote control to enter this menu directly.
• The first two alarms are similar to the normal alarm. Turn on the radio, then set the
time and set it alarms every day, once or every specific day of the week. Choose
Sound to set the sound to Beep, Melody or Radio.
• Note that the alarm source is from the preset Internet radio station if the Alarm
Sound is set to be Radio. It can only set one same IR/FM station for Alarm 1 and
Alarm 2. When it reaches the alarm time, the unit connects to the
• Internet if the default network is available. Therefore there may be some short
delay for the radio alarm to go of.
• If no network is connection in one minute, the alarm will change to Melody
automatically.
• After Alarm NAP is set, it will go off once in 5/10/20/30/60/90/120 minutes
depending on which choice you have set. You may choose Alarm Volume to
configure the volume of the alarms.
• When the alarm(s) is/are set, there will be a clock icon at the top of the display.
8
Instruction Manual
The clock icon with alarm time will also clearly display on the standby mode screen.
• During the alarm you can enter the snooze mode by pressing snooze. The alarm
will go of again in 5 minutes. Press other keys to stop the alarm.
Language
Select the OSD language: English, German, Spanish, French, Portuguese, Italian
Dimmer
Configure the brightness of the backlight on the display.
• Select Standby to set the brightness of backlight in standby mode, and select
Active to set the brightness in operation mode.
• Choose Dimmer Timer to set the duration of the radio backlight when you are not
controlling it.
Power Management
• Configure to go to standby mode automatically when in the menu or/and without
Wifi signal.
• Choose the power management timer (5/15/30mins) to set the duration of the
radio to switch standby mode automatically when you are not controlling it.
• Choose "Turn off" to ignore the power management function.
Sleep Timer
Turn off or set the sleep time of 15/30/60/90/120/150/180 minutes. Once the time
is set, there will be a bed icon with remaining minutes at the top right corner and
device will go to standby in the chosen time-period. Press Sleep on the remote
control as a shortcut of this function.
Buffer
Configure the buffer time of the music playback, 2/4/8 seconds.
Weather
• The device is able to display current weather information in the standby mode.
Turn on Standby Display and set the temperature unit (
displayed in the standby mode.
• When it is turned on, the current time and the current weather will display in
alternative 10 seconds.
C or F) to get the weather
o o