Service And Repairs - Superior FCN50 Guide D'utilisation

Tool skips fasteners, fires
intermittently
Fastener is jammed in the
tool or magazine
MAINTENANCE
Damaged pusher spring
Wrong size fastener
Magazine or wear plate is
dirty
Driver channel is worn
Driver is broken or worn
Fasteners are bent

SERVICE AND REPAIRS

All quality tools eventually require some servicing

or replacement parts due to wear from normal use.
If your tool requires service, ask your retailer or

call Superior Airco Wholesale at 1(888) 267-7713
for an authorized repair centre in your area. All
repairs made by local authorized repair centres
are fully guaranteed against defective material and
workmanship.
Some user-serviceable components are described

in the Troubleshooting section. We cannot
guarantee repairs made or attempted by anyone
other than authoized agencies.
Questions? Feel free to call our technical support

department toll-free at 1(888) 267-7713. In any
communication, please be prepared to give all the
information about your tool: model number, type,
serial number, etc.
Replace spring
Use correct fasteners: 15-
1/2 ga. L-shape cleat nails
Clean magazine and nose.
Replace blade guide
(FCN50-22)
Replace driver or piston
assembly (FCN50-8)
Use undamaged standard
fasteners
11