Operating Procedures - Superior FCN50 Guide D'utilisation

Cleat Nailer
UNPACKING
Check immediately that all parts and accessories are
included:
Cleat Nailer

Hammer

Spacer for 1/2" flooring

S3 Hex Key

S4 Hex Key

S5 Hex Key

Air Tool Oil

Manual

If anything is missing or broken, contact your retailer
or call toll-free 1.888.267.7713.
SPECIFICATIONS
Shoots standard 15-1/2 ga. "L" shaped flooring

cleat nails minimum 1-1/2" (38mm) long to a
maximum length of 2" (50mm)
Operating pressure: 70-90 psi / 488 to 621 kPa /

4.88 to 6.2 bar (max. 120 psi / 827 kPa / 8.3 bar)
Air consumption: 5 cfm @ 80 psi / 552 kPa

Cleat nail capacity: 100

Air Inlet: 1/4" NPT

Tool weight: 5.2 kg (11.5 lb)

Pkg. weight: 10.5 kg (23.2 lb)


OPERATING PROCEDURES

SET UP
Your Superior FCN50 Cleat Nailer is fully assembled
when you receive it. See the recommended air
system setup below. Be sure that the couplers are set
up so that the air hose is depressurized when adding
or removing components from the system.
Quick-Connector
Air Hose
Oiler Filter
Regulator
1
1
1
1
1
1
1
1
Air Supply
5