Listening To The Radio - Muse M-092 MR Manuel De L'utilisateur

LISTENING TO THE RADIO

Selecting band
In tuner mode, repeatedly press BND/ AMS button to select bands in following order: FM1
FM3.
Manual / automatic tuning
- Manual Tuning
Press and hold or button until "MANUAL" shows on display, then press
continuously to select a station downward or upward. Press and hold
station with a faster speed.
Note: it will return to automatic tuning mode if no key is pressed within 3 seconds. "AUTO" will shows
on display 3 seconds.
- Automatic Tuning
Press or button once, the radio automatically searches a station upward or downward
respectively and plays when it finds a station. Press
Scanning and memorizing stations
- By BND/ AMS button
In tuner mode, press and hold BND/ AMS button for 3 seconds to start scanning for stations and
store them automatically in memory. All preset stations are scrolled during few seconds under your
selected band.
- By number button 1- 6
1. Tune to a station by or button.
2. Press and hold one of the 1- 6 number buttons for 2 seconds until display shows the corresponding
number, which indicates that station is stored in the corresponding number button.
3. Under radio mode, press 1- 6 Number buttons to listen to stored stations.
4. When you are listening to a station stored on a number button, press and hold another number
button for more than 2 seconds to store the station on this number button.
Note: The unit can be stored up to 6 stations for each band.
RDS (Radio Data System)
This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS data.
This system can automatically switch to the broadcast station with the best reception as you move
on long distances (AF switching). Also if a traffic announcement (TA) or programme type (PTY) is
broadcast from a RDS station, no matter what mode you are in. this broadcast is received.
Press and hold VOL/ SEL knob, the unit will enter setting menu. Shortly press VOL/ SEL knob to
choose your desire item. Rotate VOL/ SEL knob to choose corresponding setting desired.
AF (ON/OFF) TA (ON/OFF) TA VOL
- Alternative frequency (AF)
When the AF switching mode is selected, the radio scans the signal strength of alternative frequencies.
A new AF is stronger than the current station, it switches over to that frequency for very short time,
and the new frequency is displayed for 1-2 second. (When AF flashes on LCD, it will search for the
stronger RDS station.)
Segment off: AF switching mode off.
Segment on: AF switching mode on, and receive RDS information.
Segment flashing: AF switching mode on, but RDS information is not received yet.
AR-3871 IB MUSE 001 REV1.indd 9
or
or button to tune the
or buttons again to stop scanning.
REG (ON/OFF) EON (ON/OFF) SEL PTY
GB - 5
- Traffic alarm (TA)
In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement
broadcast is received as top priority regardless of the function mode so you can listen to it.
FM2
If you select TA mode off, while a traffic announcement broadcast is being received, the traffic
announcement broadcast reception is cancelled and the unit goes into the TA standby mode.
TA SEEK:
When newly tuned station does not receive TP information for 5 seconds, the radio retunes to next
station which doesn't have the same station (PI) as the last station, but has the TP information.
When TP information gets lost at the current station for retune time which is set by RETUNE S or
RETUNE L, the radio starts to retune to next same PI station. When PI station does not catch in one
cyclic search, the radio retunes to next station with TP information.
Note: In TA SEEK mode, the current station can be changed to the completely different station because
the unit searches TP station when the field (signal) strength of the current station is very weak, or the
current station has no "TP" signal. (The higher priority is TP rather than PI.)
TA ALARM:
When this mode is selected, any automatic retune mode is not activated. Only double beep sound
(ALARM) is output. So, in this mode, the unit keeps the current station anyhow. (The PI priority is
higher than TP.)
When newly tuned station doesn't have TP information for 5 seconds, beeps come out. When TP
information gets lost at the current station for retune time, the beep sound is output.
When newly tuned station doesn't have RDS signal, "PI SEEK" is suppressed somewhat.
- TA VOL (VOLUME)
The default TA volume value is 25. You can set it to another value (25-43).
- Region ON / OFF (REG)
When the AF is on, repeatedly press VOL/ SEL button until "REG" appears in the display, rotate VOL/
SEL knob to switch between "REG ON" and "REG OFF" mode.
REG ON: should be selected to listen to the REGIONAL broadcast of the current station, even if there
is a national broadcast of this station.
REG OFF: should be selected to listen to the national broadcast of this station.
- Program type selection (PTY)
When PTY is selected, the radio starts to search corresponding PTY information and stops when the
corresponding PTY information is detected.
If corresponding PTY information does not exist any more, PTY is automatically stopped to normal
mode.
Press and hold VOL/ SEL button, when "SEL PTY" appears on display. Rotate VOL/ SEL knob to
select below programs:
NEWS/ AFFAIRS / INFO / SPORT / EDUCATE
DRAMA / CULTURE / SCIENCE / VARIED
POP M / ROCK M/ EASY M/ LIGHT M/ CLASS (CLASSICS)/ OTHER M
WEATHER/ FINANCE / CHILD (CHILDREN) / SOCIAL / RELIGION
PHONE IN / TRAVEL / LEISURE / JAZZ / COUNTRY
NATIONAL M/ OLDIES/ FOLK M/ DOC (DOCUMENT)/ TEST
After few seconds, the radio automatically searches a station with corresponding PTY information.
GB - 6
2017/11/21 17:13:08