Listening To The Radio - Muse M-199 DAB Manuel De L'utilisateur

Loudness on /off
Press and hold button until "LOUD ON" appears on display to activate LOUDNESS function.
Press and hold this button again until "LOUD OFF" displayed to cancel LOUDNESS function.
By this function, you can increase the low frequency, which can improve sound sensitivity.
Noted: Please refer to "LISTENING TO THE RADIO" for others items operation.

LISTENING TO THE RADIO

Selecting band
In DAB or FM radio mode, repeatedly press
DAB2 DAB3 or F1 F2
ÉCOUTER LA RADIO DAB/DAB+
1. When the unit is ON, press button repeatedly to select DAB mode. The unit will start
automatic scan for DAB/DAB+ stations if it's the first time to use. The display will change to
"SCAN". A progress bar will show the progress of the scan and the number of stations found
during the scan will also be displayed.
2. When the scan is complete, the unit will select the first available station and start to play
automatically. Stations will be listed in numerical and then alphabetical order by default.
Note: When the DAB/DAB+ radio station list is stored, it will not search automatically again.
Press and hold button to search and list station.
3. Use or to select through the list of stations. "TUNING" appears on display and will
tune to the desired station after a few seconds.
Note:
- If no broadcasts are found by DAB/DAB+ scan, "NO SERVICE" appears in the display.
- For a better reception, extend the antenna or do the full scan again in another place.
- During the search operation, the sound level is automatically muted.
LISTENING TO FM RADIO
In FM radio mode, press or button to manual tuning, press and hold
automatic search.
Note: For a better reception, extend the antenna
Scanning and memorizing stations
This unit can store 18 FM and 18 DAB/DAB+ stations.
- By button
In DAB or FM radio mode, press and hold
and store them automatically in memory. All preset stations are scrolled during few seconds
under your selected band. To remain on a station, press again the
AR-3736D IB MUSE 001 REV1.indd 10
button to select bands in following order: DAB1
F3.
or
button for 3 seconds to start scanning for stations
button.
GB - 5
- By number button 1- 6
1. In DAB or FM radio mode, tune to a station by
2. Press and hold one of the 1- 6 number buttons for 2 seconds until LCD shows the corresponding
number, which indicates that station is stored in the corresponding number button.
3. Press 1- 6 Number buttons to listen to stored stations.
4. When you are listening to a station stored on a number button, press and hold another number
button for more than 2 seconds to store the station on this number button.
Note: The unit can be stored up to 6 stations for each band.
RDS (Radio Data System)
This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS
data. This system can automatically switch to the broadcast station with the best reception as you
move on long distances (AF switching). Also if a traffic announcement (TA) or programme type
(PTY) is broadcast from a RDS station, no matter what mode you are in. this broadcast is received.
Press VOL/SEL/PTY button once to display the current time, press this button again will enter
into setting menu. Shortly press VOL/SEL/PTY knob to choose your desired item. Rotate VOL/
SEL/PTY knob to choose corresponding setting desired.
AF(ON/OFF) REG(ON/OFF)
SEL PTY STEREO/MONO
- Alternative frequency (AF)
When the AF switching mode is selected, the radio scans the signal strength of alternative
frequencies. A new AF is stronger than the current station, it switches over to that frequency for
very short time, and the new frequency is displayed for 1-2 second. (When AF flashes on LCD,
it will search for the stronger RDS station.)
Segment off: AF switching mode off.
Segment on: AF switching mode on, and receive RDS information.
Segment flashing: AF switching mode on, but RDS information is not received yet.
- Region ON/OFF (REG)
When the AF is on. Repeatedly press VOL/SEL/PTY button until "REG" appears in the display,
rotate VOL/SEL/PTY knob to switch between "REG ON" and "REG OFF" mode.
REG ON: should be selected to listen to the REGIONAL broadcast of the current station, even
if there is a national broadcast of this station.
to REG OFF: should be selected to listen to the national broadcast of this station.
- Traffic alarm (TA)
In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement
broadcast is received as top priority regardless of the function mode so you can listen to it. If
you select TA mode off, while a traffic announcement broadcast is being received, the traffic
announcement broadcast reception is cancelled and the unit goes into the TA standby mode.
or button.
TA(ON/OFF) TA VOL EON(ON/OFF)
DX/LOCAL
GB - 6
2019/10/17 15:17:22