Listening To The Radio; Bluetooth Function - Muse M-195 BT Manuel De L'utilisateur

Loudness on /off
Press and hold LOUD button until "LOUD ON" shows on display to activate LOUDNESS function.
Press and hold this button again until "LOUD OFF" to cancel LOUDNESS function.

LISTENING TO THE RADIO

Selecting band
In tuner mode, repeatedly press BAND button to select bands in following order:
FM1 FM2 FM3.
Manual / automatic tuning
- Manual Search
Choose your radio station with or
- Automatic search
Press and hold for few seconds or
station with a weak signal can be set manually by repeatedly pressing
NOTE: During the search operation, the sound level is automatically muted.
Scanning and memorizing stations
- By BAND button (AMS)
In tuner mode, press and hold BAND button for 3 seconds to start scanning for stations and
store them automatically in memory. All preset stations are scrolled during few seconds under
your selected band. To remain on a station, press again the BAND button.
- By number button 1- 6
1. Tune to a station by or button.
2. Press and hold one of the 1- 6 number buttons for 2 seconds until LCD shows the corresponding
number, which indicates that station is stored in the corresponding number button.
3. Under radio mode, press 1- 6 Number buttons to listen to stored stations.
4. When you are listening to a station stored on a number button, press and hold another number
button for more than 2 seconds to store the station on this number button.
Note: The unit can be stored up to 6 stations for each band.
DX/LOCAL
Repeatedly press VOL/SEL knob to select "DX/LOCAL" mode.
DX MODE: The weak signal out-of-town stations may be received.
LOCAL MODE: the strong signal local stations can be received.
STEREO/MONO
Repeatedly press VOL/SEL knob to select "STEREO/ MONO"
mode. FM listening is generally done in Stereo mode. However, if the signal is weak or
reception is not as good as you would like, switching to Mono mode usually improves
the overall sound quality.
LISTENING TO USB/CARD
To insert an USB device (not included)
Connect your USB device to the USB port on front panel. It will switch to "USB" mode and start
playback automatically.
.
. The automatic search locates strong stations. A
or
GB - 5
To insert a SD/ MMC card (not included)
Insert a SD/MMC card to the card slot. It will switch to "CARD" mode and start playback
automatically.
Basic player functions
Play/pause: Press the
Skip/fast search:
1. Press to skip forward to next song.
2. Press button to play the previous song.
3. Press -10 or +10 to skip to 10 songs backward or forward.
4. Long press -10 or +10 to select previous folder or next folder in MP3 mode.
Intro scan:
Press INT button to play first 10 seconds of each track, and "INT ON" appears on display. Press
again to cancel and "INT OFF" appears.
.
Repeat:
Press RPT button repeatedly to select a play mode: RPT ONE, RPT DIR, RPT OFF
Random playback:
Press RDM button to play all files in random order, and "RDM ON" appears on display. Press
again to cancel this function and "RDM OFF" appears.
Note:
• There are many USB devices or SD/SDHC/MMC card on the market. We cannot guarantee
to support all different models. Please try another USB device or SD/ MMC card if your device
is not supported.
• The unit might not support all the multimedia files stored in SD/ MMC card or USB because it
includes some special playback procedure which might not be compatible with the procedure
of this unit.
LISTENING TO AUXILIARY SOURCE
1. Connect your auxiliary source (e.g. mp3 player) to the AUX IN jack.
2. Press button to turn the unit on.
3. Press MODE to select AUX mode.
4. Start playback from your auxiliary source.
5. Adjust the volume to desired level.
6. Disconnect your auxiliary source from the Aux in jack, press MODE button to select other
source.

BLUETOOTH FUNCTION

The Bluetooth
®
and any use of such marks by New One S.A.S is under license. Other trademarks and trade
names are those of their respective owners.
• Before operate the Bluetooth function, make sure your mobile phone supports Bluetooth function.
• For different model of mobile phone, Bluetooth emissive power has some difference. To get
the best conversation quality, it is recommended that the distance between the mobile phone
and the unit is within 3 meters (Max.10 meters).
• Don't put any metal object or any obstacle between the path of the mobile phone and the unit.
button to pause playback. Press again to resume playback.
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
GB - 6