Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
61401274_GB_DE_Maquetación 1 30.05.2012 14:31 Page 27
Fault
The hob suddenly starts to bleep
The hob (or any of the hotplates) powers off during cooking
A timed hotplate failed to power off at the end of the set time
When cooking at a level below 9, there are fluctuations in the power
Possible cause
There is a cloth, container
or liquid on the Touch Con-
trol.
The timer was activated
and the preset time has
finished.
There is a container, cloth
or liquid covering the Touch
Control.
One or several of the hot-
plates has overheated.
The hotplate had not been
set correctly.
The induction generator of
the cooker turns on and off
alternately in order to keep
the chosen cooking level.
Possible solution
Remove any object covering
the Touch Control and/or
clean any liquid that might
have been spilt on it.
Touch the clock sensor to
deactivate the bleep.
Remove any object that
might be covering the
Touch Control.
Allow the overheated hot-
plates to cool down for a
few minutes before powe-
ring them up again.
Make sure that the time
was set following the ins-
tructions manual.
This is not a defect.
GB
27
Publicité
Table des Matières
