How The Dustbag Change Indicator Works; Replacing The Dustbag; How To Change The Dust Compartment Filter; When To Change The Air Clean Exhaust Filter - Miele S 2111 Mode D'emploi

en
Checking the dustbag change
indicator
^ Attach the standard floorhead to the
suction tube.
^ Switch the vacuum cleaner on and
select the highest power setting.
^ Lift the floorhead off the floor a little.
How the dustbag change indicator
works
The indicator is designed to measure
the air permeability of a dustbag
containing a mixture of household dust
made up of: dust, hair, threads, carpet
fluff, grit etc.
However, if the cleaner has been used
to vacuum up fine dust, such as
plaster, brick dust, cement or flour, the
pores of the dustbag will become
blocked very quickly. This affects the
air permeability of the bag, and the
marker will indicate that the bag is "full"
even when it is not. If this happens the
bag will need to be changed.
If, on the other hand, a large amount of
hair and carpet fluff which typically
contains a lot of air is vacuumed up, the
indicator may fail to react even though
the bag is full. You should still change
it. Both these extremes can occur.
Replacing the dustbag (dia. 20 + 21)
^ Press the release button for the dust
compartment lid and raise the lid as
far as it will go.
The dustbag has a closing flap which
closes automatically when the dust
compartment lid is raised to prevent
any dust escaping.
32
a Pull the dustbag out by the grip next
to the self-closing flap on the collar.
b Fit the new dustbag into the holder
as far as it will go. Leave it folded up
when you take it out of the box.
^ It should be unfolded in the dust
compartment.
^ Close the dust compartment lid
securely, making sure it clicks into
position. Take care not to trap the
dustbag when doing so.
Warning: The lid will not close
without a dustbag in place. Do not
use force.
When to change the dust compartment
filter (for motor protection)
Replace this filter every time you start a
new packet of dustbags. A dust
compartment filter is supplied with
every packet of Miele dustbags.
How to change the dust
compartment filter (dia. 22)
^ Open the dust compartment lid.
^ Unclip the filter panel, remove the old
filter and replace with a new one.
^ Close the filter panel.
^ Close the dust compartment lid.
When to change the Air Clean
exhaust filter
Replace this filter every time you start a
new packet of Miele dustbags. An Air
Clean exhaust filter and a dust
compartment filter are supplied with
every packet of Miele dustbags.