Control Panel; Temperature Settings - Candy CELC177 P Guide D'utilisation

Control panel

Temperature
set button
Super Cooling Mode
This button allows setting temperature of the fridge. In order to set values for fridge partition,
press this button. Use this button also to activate Super Cooling mode.
1.1.1. Alarm light
In case of a problem within the fridge, the alarm led will release red light
1.1.2. Super Cooling Mode
When would it be used?
• To cooling huge quantities of food.
• To cooling fast food.
• To cooling food quickly.
• To store seasonal food for a long time.
How to use?
• Press temperature set button until super cooling light comes on.
• Super cooling led will light during this mode.
• For optimal appliance performance in maximum cooling capacity, set the appliance
to active Super Cooling mode 5 hours before you put the fresh food into the fridge.
During this mode:
If you press temperature set button, the mode will be cancelled and the setting will
be restored from MAX.
Note: "Super cooling" mode will be automatically cancelled after 5 hours.

1.1.3. Temperature Settings

• The initial temperature of the Setting Display is Middle temperature indicator.
• Press temperature set button once.
• Every time you press the button, the setting temperature will decrease.
• If you press temperature set button until super cooling symbol is displayed on your fridge
settings display and you do not press any button within the following 3 seconds, Super
cooling will blink.
• If you keep on pressing, it will restart from last value.
Alarm
indicator led
Symbol of
EN - 40 -
Temperature indicator