Wearing Parts - Solo Cleanline 305A Instructions D'emploi

Model ("Typ")
Spraying agent tank:
Residual volume not properly discharged by the device
Maximum permissible operating pressure
Permissible operating temperature
Tank material
Spray tube
Pressure hose:
Sealing material
suitable for spraying agents in the pH range
Maximum delivery at 3 bar [43 psi]
Standard spray nozzle
Weight (ready for operation):
Dimensions (without spray tube and pressure hose):

7 Wearing parts

Various parts are subject to application-specific
wear or to normal wear and must be replaced in
good time if necessary.
The following parts are subject to normal wear and
are not covered by the manufacturers guarantee:
 All rubber parts that come into contact with the
spraying agent
 Spray nozzle
 Filters
 Seals
8 Warranty
We warrant problem free quality and will cover the
cost of replacing parts which are found to be faulty
in material or show manufacturing defects within
the prescribed guarantee period after the date of
purchase.
Please note that specific guarantee conditions may
differ from country to country. When in doubt,
please ask the vendor of the goods. The vendor of
the product is responsible for guarantee
applications.
6 Specification
Nominal volume ("Total Vol.")
Max. fill volume ("max. Vol.")
Length
Length
Tank empty ("net weight")
tank filled to max.
Height
We hope you will understand that we cannot be
liable for damage resulting from these causes:
 Non-compliance with operating instructions.
 Neglecting required maintenance and repair
 Wear from normal use (particularly: gasket
 Using non-approved tools.
 Use of force, improper treatment, misuse and
 Attempted adjustments and repairs by non-
 Unauthorized modification or changes made to
 Use of unsuitable spare parts or non-original
 Use of non-approved media in the spraying
 Damage caused by using the product in the hire
Normal cleaning, adjustments or maintenance jobs
cannot be claimed as part of the guarantee.
All guarantee work must be carried out by one of
our authorised service centres.
305 A 305 B
approx. 7.5 l
[1.98 gal]
approx. 5.0 l
[1.32 gal]
< 200 ml [6.8 oz]
3.0 bar [43 psi]
0–40 °C [32–104 °F]
Polyethylene
500 mm [19.7"]
1,500 mm [59"]
FKM EPDM
1 - 7 7 - 14
0.8 l/min [0.21 USgal/min]
flat jet nozzle 90° PVDF
2.6 kg [5.7 lbs]
7.6 kg [16.8 lbs]
450 mm [17.7"]
Width 200 mm [7.9"]
Depth 200 mm [7.9"]
jobs.
seals, membranes, collars, spray nozzles and
filters).
accidents.
qualified persons.
the device.
parts if such parts are the cause of the damage.
agent tank.
or rental industry.
307 A 307 B
approx. 9.0 l
[2.38 gal]
approx. 7.0 l
[1.85 gal]
FKM EPDM
1 - 7 7 - 14
2.8 kg [6.2 lbs]
9.8 kg [21.6 lbs]
520 mm [20.5"]
200 mm [7.9"]
200 mm [7.9"]
ENGLISH 10