Cleaning Of The Bt 500; Error Codes; Technical Specifications - Pecunia BT 500 Mode D'emploi

Cleaning of the BT 500

The BT 500 can be easily cleaned by using air preassure or cleaning brush.
By using the air-pressure, take care, that the pressure is not too high (max. 4 bar) or use
the air-pressure cleaner B8 for cash handling devices (therefore please refer to the support
of hbw cash solutions). For cleaning the cover, you can use the cleaner R 605 (therefore
please refer to the support of hbw cash solutions).
Please never clean the device by using liquids, as the device can be destroyed!
Disconnect the power supply line for cleaning the device.

Error codes

Error code
EH, EC, EJ, CFx

Technical specifications

__________________________________________
Ambient temperature
Relative humidity
Different models
Power supply
Power consumption
Dimensions
Weight
Technical specification is subject to change without prior notice.
Technical specification are subjected to change without prior notice.
Error
Banknote
misdetected or
suspect
banknote.
Possible reason
There is missing one
security feature on the
banknote or it may
be damaged. Possibly
the wrong currency is
setted.
0 - 40 °C / 0 - 104 °F
25 - 80 %
BT 500 / BT 500 with battery
230 V / ~ 50 Hz (adapter)
ca. 20 W
125 x 78 x 135 (mm)
0.50 kg
solution
Check the banknote
again to be sure to have
no misdetecting. If the
message will be shown
several times, possibly
the banknote is suspect.
Technical specifications
9