Post Flight; Motor Service - Horizon Hobby FORCE RC Bare Bear Manuel D'utilisation

EN

Post Flight

Disconnect the fl ight battery from the ESC (Required for Safety
1
and battery life).
2 Power OFF the transmitter.
3 Remove the fl ight battery from the aircraft.
4 Recharge the fl ight battery.

Motor Service

CAUTION: Always disconnect the fl ight battery before performing
motor service.
Disassembly
1. Remove the screw (A) and spinner (B) from the prop nut (C).
2. Remove the propeller (D), backplate (E) from the prop adapter and motor.
You will need a tool to turn the spinner nut.
3 Remove the 3 screws (G) from the prop adapter (H) and remove it from the
motor.
4. Remove the 4 screws (I) from the motor mount (J) and the fuselage.
5. Disconnect the motor wires from the ESC wires.
6. Remove the 4 screws (K) and motor (L) from the motor mount.
Assembly
Assemble in reverse order.
• Correctly align and connect the motor wire colors with the ESC wires.
• The propeller size numbers (8 x 8) must face to the front of the airplane for
correct propeller operation.
• A tool is required to tighten the lock nut on the collet.
10
5 Repair or replace all damaged parts.
Store the fl ight battery apart from the aircraft and monitor the
6
battery charge.
Make note of the fl ight conditions and fl ight plan results, planning for
7
future fl ights.
A B
E
G
H N
H
L
D
C
J
I
K
Bare Bear