Home Screen - Ideal Networks SignalTEK CT Guide D'utilisation

HOME SCREEN

The HOME screen is displayed following start-up. (To return to the HOME screen from any
other screen, press Escape repeatedly until the HOME screen appears.)
When the Remote Unit Icon is displayed, indicating that the two units are connected
En
together via the cable to be tested, press Autotest at either end to start the tests.
Memory Status
Shows the number of
results stored / total
Remote Unit Icon
Indicates that the
Remote Unit is
connected to the Test
Data Test Icon
Indicates progress of
the Data Test. Highlight
the icon using the
cursor buttons and
press Enter to view the
details of the Data Test.
Wiremap Test Icon
Indicates progress of the
Wiremap Test. Highlight
the icon using the cursor
buttons and press Enter
to view the details of the
Wiremap Test.
Job Selection
Shows the currently
selected Job. Highlight
the icon using the cursor
buttons and press Enter
to select which Job to
save results to.
Press F1 (JOBS) to
access the JOBS
5
Cable length
(Indicated
after the
tests are
complete)
capacity
Unit
STOP / SAVE / NAME
Press F2 (STOP) to
interrupt the test, or
(SAVE) to save the
JOBS
result manually, or
(NAME) to edit the
name format of the
menu.
subsequent test results
SignalTEK CT
Battery Status:
Battery full
2
Battery / full
3
1
Battery / full
3
Battery empty
Mains / on charge
Current time
Test Unit Icon
Notifications Area
Shows the current activity or
status of the tester
Test Status:
Ready to test
Test in progress
Test Passed
Test Failed
Result Name
Shows the name
of the last saved
result
Auto Save Selection
Highlight the icon using the
cursor buttons and press
Enter to select how results
should be saved
SETUP
Press F3 (SETUP) to
access the SETUP
menu.
156840.04