Ideal Networks SignalTEK CT Guide D'utilisation page 12

Downloading results to a smartphone (only when no tests are running)
To enable Wi-Fi for results transfer:
• Insert Wi-Fi dongle into the SignalTEK CT USB port.
• From the home screen select the JOBS icon.
En
• The display will show the Job List screen. Wi-Fi connectivity is indicated by the top
bar on the SignalTEK CT screen changing from grey to blue:
Now the SignalTEK CT is ready for results transfer wirelessly.
Note
To minimise battery consumption the Wi-Fi connectivity is enabled for 5 minutes
following power up and whenever the user is in the JOB screen.
To download results to an Android™ smartphone:
• Download and open App from the Google Play™ Store.
•
Insert the USB Wi-Fi adapter in the USB port of SignalTEK CT.
• Search and connect to SignalTEK CT. The SSID will be of the form "IDEALC-
XXXXXX".
The SSID and password can be viewed on the SignalTEK CT under the SETUP |
REPORTS screen.
• You will be prompted for the SignalTEK CT Wi-Fi password if it has been changed
from the default value. You can change the password inside SETUP / REPORTS.
Make sure the USB Wi-Fi adapter is not activated (no blue colour on top bar)
otherwise the change will not be allowed.
• Once connected the App will display list of JOBs on the SignalTEK CT. These can
be selected and downloaded to the smartphone.
• Once results are on the smartphone they can then be transferred using email or
other share mechanisms.
To download results to an iPhone®:
•
•
•
11
Download and open App from iTunes®.
Insert the USB Wi-Fi adapter in the USB port of SignalTEK CT.
Search and connect to SignalTEK CT. The SSID will be of the form
"IDEALC-XXXXXX". The SSID and password can be viewed on the
SignalTEK CT under the SETUP | REPORTS screen
SignalTEK CT 156840.04