Télécharger Imprimer la page

Lovibond Tintometer IRiM Mode D'emploi page 10

Masquer les pouces Voir aussi pour Tintometer IRiM:

Publicité

Check the Device Manager
[Right Click My Computer >> Management >> System tools >> Device Manager]
You should see the same icon as shown in the figure below. If not start again from step 2
(connect IRiM board with the PC per USB).
If your device is in DFU mode, start the FLIP software and follow the instructions explained
below:
Start >> programs >> flip 3.2.2 >>flip3.2.2
1. Select AT90 USB1287 device.
10
D F U_3 02/2019

Publicité

loading