HQ Power PROCD3000 Mode D'emploi page 3

b. Control unit
1. UNIT 1 – Control Operation Panel
This operation panel remotely controls the main unit 1.
2. UNIT 2 – Control Operation Panel
This operation panel remotely controls the main unit 2.
3. OPEN / CLOSE button
Press to load or eject the disc. Each press will open or close the tray.
NOTE: The tray will not open unless PAUSE button has been pressed first.
4. LCD
The liquid crystal display (LCD) indicates the track number, time (in minutes, seconds, frames), remaining time,
pitch, beat, loop, auto cue single, continue and time bar.
5. CONT. / SINGLE (OUTRO)
Press this button to switch between the AUTO CUE SINGLE and CONTINUOUS play mode. The selected mode
is indicated o the display.
Auto Cue Single: After each track, the unit pauses at the beginning of the next track. The playback starts from an
audible point.
Continue: Play the entire track.
Outro: Press this button for 3 seconds. The unit will play the last 30 seconds from each track.
6. TIME / STOP button
Switch between remaining time, elapsed playing time and total remaining time. Press this button for more than 3
seconds to set the unit in STOP mode.
7. SEARCH button
Press this button for quick forward or backward search.
8. TRACK button
Select the track to be played.
9. "+10" button
Forward 10 tracks.
10. PLAY / PAUSE
Press the PLAY / PAUSE button to pause the disc. Press the button again to continue playing.
11. CUE button
The cue function allows the disc to be played from a memorized point any given number of times. When the unit
is in pause mode, press the CUE button to set up the memorized cue point. The CUE button will blink.
12. BOP button
The playback will automatically play from the CUE point when this button is pressed.
PROCD3000 3 VELLEMAN