Dismantling And Disposal; Ec Declaration Of Conformity - Häfele e-drive Notice D'emploi

OPERATING INSTRUCTIONS
15 Dismantling and
disposal
16 EC Declaration of
conformity
• Before dismantling, unplug the automatic drive from the power supply and
disconnect all other connections.
• The working procedure for dismantling is the same as for assembly, but in reverse
order.
NOTE
> Do not dispose of the automatic drive in the household waste.
> Dispose of automatic drive in accordance with national regulations.
Manufacturer:
hereby declares that the following product:
Product designation:
Type designation:
Year of manufacture:
complies with all of the relevant regulations of the machinery directive (2006/42/EC).
The machine also complies with all conditions of the Low Voltage Directive (2006/95/
EC) and the Electromagnetic Compatibility Directive (2004/108/EC).
The following harmonised standards have been applied:
• EN 60335-1 : 2002 +a11 : 2004 +A1 : 2004
• EN 60335-1 : 2002 + A12 : 2006 + A2 : 2006
• EN 60335-2-103 : 2003 + A11 : 2009
• EN 61000-4-2
• EN 61000-4-3
• EN 61000-4-4
• EN 61000-4-5
• EN 61000-4-6
• EN 61000-4-13
• EN 61000-6-3 : 2005
The above-mentioned product is exclusively intended for installing in furniture in
accordance with the correct purpose of use described in these instructions. Start-up
is not permitted until conformity of the end product with the machinery directive
(2006/42/EC) has been established.
Name of authorised person for documentation: José Lorca
Address of authorised person for documentation: See manufacturer address
Nagold, 28.09.2012
Häfele GmbH & Co KG
Postfach/P.O. Box 1237
D-72192 Nagold, Germany
Phone +49 (0)74 52 / 95-0
E-drive automatic drive
TS1xxxxA
from 2012 on
José Lorca, Head of Product Range Management
en
17