Risk Of Injury; Special Notes - AEG JP 10 Mode D'emploi D'origine

28 www.aeg-automotive.com

Risk of injury!

Do not modify or manipulate the
•
product as this will increase the risk
of injury.
The high-pressure hose becomes
•
hot during use. Therefore allow it
to cool down before touching it and
rolling it up.
• Do not use the compressor for more
than 6 minutes. Then allow it to cool
down for approx. 10 minutes. Over-
heating and permanent damage
may otherwise occur.
• Please also note the operating inst-
ructions of connected devices.

Special notes

• Do not inflate objects beyond the
intended or specified pressure. The
object could burst.
• Never inflate larger objects such as
lorry or tractor tyres, air mattresses
or rubber boats. This exceeds the
delivery rate, thus the run-time of
the compressor.
The pressure specifications of the
•
manometer are reference values.
Check the pressure with a calibrated
air gauge.
The max. pressure of 150 PSI
•
(10.3 bar) will only be reached if the
pump volume is not greater than
0.5 L.