Drill Safety Warnings; Additional Safety Precautions - Hilti SF 22-A Mode D'emploi

of the power tool for operations different from those intended
could result in a hazardous situation.
5.1.5 Battery tool use and care
a) Recharge only with the charger specified by the manufac-
turer. A charger that is suitable for one type of battery pack
may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire.
c) When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the
battery; avoid contact.
flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
5.1.6 Service
a) Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.

5.2 Drill safety warnings

a) Wear ear protectors when impact drilling. Exposure to noise
can cause hearing loss.
b) Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
c) Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.

5.3 Additional safety precautions

5.3.1 Personal safety
a) Hold power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give
the operator an electric shock.
b) Always hold the power tool securely with both hands on
the grips provided. Keep the grips dry, clean and free from
oil and grease.
c) Improve the blood circulation in your fingers by relaxing
your hands and exercising your fingers during breaks
between working.
d) Avoid touching rotating parts.
on only after bringing it into position at the workpiece.
Touching rotating parts, especially rotating insert tools, may
lead to injury.
e) Activate the safety lock (forward / reverse switch in the
middle position) before storing or transporting the power
tool.
f) The power tool is not intended for use by children, by debil-
itated persons or those who have received no instruction
or training.
g) Children must be instructed not to play with the power tool.
h) Dust from material such as paint containing lead, some wood
species, minerals and metal may be harmful. Contact with
or inhalation of the dust may cause allergic reactions and/or
respiratory diseases to the operator or bystanders. Certain
kinds of dust are classified as carcinogenic such as oak and
beech dust especially in conjunction with additives for wood
conditioning (chromate, wood preservative). Material contain-
ing asbestos must only be treated by specialists. Where the
use of a dust extraction device is possible it shall be used.
To achieve a high level of dust collection, use a suitable
vacuum cleaner of the type recommended by Hilti for wood
dust and/or mineral dust together with this tool. Ensure
that the workplace is well ventilated. The use of a dust
mask of filter class P2 is recommended. Follow national
requirements for the materials you want to work with.
Printed: 30.09.2013 | Doc-Nr: PUB / 5070677 / 000 / 02
If contact accidentally occurs,
Switch the power tool
en
23