Transport; Storage; Guarantee; Technical Data - Altrad Lescha BSL Série Notice Originale

Replace table insert
Replace a worn-out or damaged table insert immediately.
Push the table insert (10) from below out of the saw table
and replace it by a new table insert.

Transport

Remove mains plug before each
transport.
Transport the saw only with:
− the upper saw band guidance positioned completely
downwards
− unscrewed jutting out accessories
Type / Model
Year of construction
Motor output P
1
Mains voltage
Mains frequency
Idle speed
Fuse protection
Length of saw band
Width of saw band
Thickness of saw band max.
Saw band roll
Saw table size
Transverse adjustment saw table
Cutting height max.
Width of passageway max.
Exhaust connector
Sound power level L
WA
Soundpressure level L
PA
Uncertaintity K /
WA PA
Dimensions (length x width x height)
Weight
Commercial small dust removers or industrial vacuum cleaners can be used for exhaustion.
24
 Store unused equipment in a dry, locked place out of the
reach of children.
 To extend the service life of the saw and guarantee smooth
operation, before storing for a longer period
− thoroughly clean the saw
− treat all movable parts with an environmentally friendly
oil
Never use any grease!
Please note the attached guarantee declaration.

Technical data

BSL 250
see last page
420 W
230 V
50 Hz
660 / 960 min
–1
10 A slow
1790 mm ±5 mm
10 ± 1 mm
0.35 mm ±0.05 mm
255 mm
300 x 300 mm
0 – 45 °
120 mm / 90°
70 mm / 45°
245 mm
∅
36 mm / Ø 100 mm
90.4 dB (A)
77.4 dB (A)
3. 0 dB (A)
510mm x 445mm x 855 mm
23 kg

Storage

Remove the mains plug from the socket.

Guarantee