Connecting To A Power Source; Using The Rechargeable Batteries - Sony WALKMAN D-NE1 Mode D'emploi

B Connecting to a power source
You can use the following power sources:
• Rechargeable batteries
• AC power adaptor (see "Playing an audio
CD or ATRAC3plus/ATRAC3/MP3 files")
• LR6 (size AA) alkaline batteries (external
battery case)
For the battery life and charging time of the
rechargeable battery, see "Specifications."
Using the rechargeable
batteries
Charge the rechargeable batteries
before using it for the first time.
You can use only the following rechargeable
batteries for your CD player.
• NH-14WM (A) (supplied)
1
Open the battery compartment lid
inside your CD player.
2
Insert two rechargeable batteries
by matching the 3 to the diagram
in the battery compartment and
close the lid until it clicks into
place.
28
-GB
Insert the # end first
(for both batteries).
3
Connect the AC power adaptor to
the DC IN 4.5 V jack of the
supplied charging stand and an
AC outlet. Then place the CD
player on the supplied charging
stand, aligning the V mark on the
CD player with the v mark on the
stand.
CHARGE lamp
to DC IN 4.5 V
AC power adaptor
to an AC outlet
Align V with v.