METREL MD 9040 Manuel D'utilisation page 12

MD 9040 & MD 9050 Digital multimeter Operation
CAUTION
Using resistance and continuity function in a live circuit will produce false results and
may damage the instrument. In many cases the suspected component must be
disconnected from the circuit to obtain an accurate reading
Temperature functions (for MD9050 only)
Press SELECT button momentarily to toggle between C and F readings. For Dual
Channel Temperature function on the MD9050, press T1-T2 (RANGE) button
+T2 +T2
momentarily can select T1, T2, T1 or T1-T2 readings. Last selection will be saved
as power up default for repeat measurement convenience.
Note: Be sure to insert the banana plug type-K temperature bead probe AMD 9023 with
correct polarities. You can also use a plug adapter AMD 9024 (Optional
purchase) with banana pins to type-K socket to adapt other standard type-K mini plug
temperature probes.
12