METREL MD 9040 Manuel D'utilisation page 11

MD 9040 & MD 9050 Digital multimeter Operation
+Hz +Hz +ACmV
ACmV , dBm (MD9050 only), Hz functions
Press the SELECT button momentarily to select the subject functions in sequence. Last
selection will be saved as power up default for repeat measurement convenience.
nS Conductance (MD9050 only),  Resistance,
Continuity functions
Press the SELECT button momentarily to select the subject functions in sequence for
MD9050. Last selection will be saved as power up default for repeat measurement
convenience. Direct rotary switch selection on  Resistance and
Continuity
functions for the MD9040
Note: Conductance is the inverse of Resistance, that is S=1/ or nS=1/G. It virtually
extends the Resistance measurements to the order of Giga-Ohms for leakage
measurements.
Continuity function is convenient for checking wiring connections and operation of
switches. A continuous beep tone indicates a complete wire.
11