Start-Up; Setting Switching Times - SilverCrest 285220 Instructions D'utilisation Et Consignes De Sécurité

the manufacturer or dispose of the device
in an environmentally responsible way.
Do not touch the device with wet hands.
Disconnect the device from the power
mains to de-energise.
Do not connect devices from which
hazards could arise during unsupervised
operation (i.e. heaters).
This device is child-proofed. Both pins of
the plug must be inserted into the socket
at the same time.

Start-up

Setting switching
times (Fig. B)
Use the switching pins
when you wish the timer to switch the con-
nected device on or off. Using a pointy ob-
ject, e.g. pen, push one or several pins down
10 GB/IE/NI
to set the times
4