HumanTechnik lisa LSA0306 Mode D'emploi page 11

Baby monitor: The baby LED lights up for 40 seconds. The vibration
(28 seconds) sequence is as follows:
Vibration
Call button: The call button LED lights up for 40 seconds.
The vibration (28 seconds) sequence is as follows:
Vibration
Alarm: All four LEDs flash for 40 seconds. The vibration
(28 seconds) sequence is as follows:
Vibration
Water alarm: Water alarm LED lights
Vibration
Fire alarm: Fire alarm LED lights
Vibration
V4 vibration 0,4 seconds
P8 pause 0,8 seconds
P12 pause 1,2 seconds
P16 pause 1,6 seconds
Battery empty
The battery empty LED lights up. The batteries need to be exchanged.
3. Recalling the most recent signal
The Portable Radio Receiver stores each signal it receives for a period of
3 minutes. During this time, you can call up the signal again by pressing the
reset button. The signal is then displayed on the indicator lamps. A vibration
signal is not triggered.
P20 pause 2,0 seconds
P30 pause 3 seconds
P36 pause 3,6 seconds
P48 pause 4,8 seconds
English 11