Accessories; Noise/Vibration Information; Declaration Of Conformity - Wurth Master EMS 1.6 Notice D'utilisation

EMS.book Seite 9 Dienstag, 23. August 2005 8:38 08
If the machine should fail despite the care taken in man-
ufacturing and testing, repair should be carried out by
a Würth Master-Service agent.
In all correspondence and spare parts orders, please
always include the 8-digit order number given on the
nameplate of the machine.
For the current spare parts list of this machine, log into
the Internet under "http://www.wuerth.com/partsman-
ager" or ask for a copy at your nearest Würth branch
office.

Accessories

The following sets of accessories are available for
equipping the power tool for the first time:
EMS 2.0:
– Window mounting
– Joinery/interior decorating
– Tile laying/Sanitary
EMS 1.6:
– Car glazier
– Cargo
Further information on their application is contained in
the sets of accessories.

Noise/Vibration Information

Typically the A-weighted noise levels of the machine
are: sound pressure level 81 dB (A); sound power
level 92 dB (A).
Measurement uncertainty K=3 dB.
Wear hearing protection!
Classification of Würth
application tools according to
the vibration class
VC0
VC1
VC2
VC3
VC4
VC5
*These values are based on a working cycle consisting
of no-load and full-load operation of the same dura-
tion.
Measured values are determined according to
EN 60 745-1.
Power tools, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
are no longer suitable for use must be separately col-
lected and sent for recovery in an environmen-
tal-friendly manner.
For this Würth tool, we provide a warranty in accord-
ance with statutory/country-specific regulations from
the date of purchase (proof of purchase by invoice or
delivery note). Damage that has occurred will be cor-
rected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the warranty.
Claims can be recognised only when the tool is pre-
sented undisassembled to a Würth branch office or a
Würth field service employee.
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization
EN 55 014-1/-2, EN 61 000-3-2/-3-3 according to
the provisions of the regulation s 98/37/EC
89/336/EEC.
Rated acceleration*
Adolf Würth GmbH & Co. KG
< 2.5 m/s 2
< 5 m/s 2
< 7 m/s 2
< 10 m/s 2
P. Zürn
< 15 m/s 2
> 15 m/s 2
Subject to change without notice
Disposal
Do not dispose of power tools into
household waste!
According to the European Directive
2002/96/EC on waste electrical and
electronic equipment and its incorpora-
tion into national law, power tools that
Warranty

Declaration of Conformity

documents:
05
R. Bauer
EN 60 745-1,
and
9