Instructions For Use - TurMix Platinum Mode D'emploi

Instructions for use

important
The built­in safety switch prevents the device from being used without the lid
being locked.
Preparation
Protect sensitive work surface with a protective and anti­slip mat.
Plug in before use and place a suitable container under the outlet
spout.
Turn the device on / off
Turn on the device. Feed the contents into the feed opening in the
lid and, if required, push these down with the pusher. After use,
turn the device off and unplug it. Let the device cool down before
storing it. important: Slight vibrations may occur during the use
and are model­dependant. The unit will usually stop vibrating if
you continue extracting the juice.
Emptying the pulp ring
Whilst in operation, leftovers will not only collect in the pulp ring
but also underneath it. This may result in the ring being pushed
upwards. Regularly empty the contents of the pulp ring in a waste
bin and clean the groove of the juicer sieve. Place the pulp ring
back in the device. Place the lid with the feed opening at the front
and lock with the locking system on both sides.
Instructions for use
EN
57