Philips AVENT SCF883 Mode D'emploi page 15

Masquer les pouces Voir aussi pour AVENT SCF883:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 96
»
When the jar is correctly locked in place on the main unit, the
the jar will line up with the
7
Push and hold the blending button to start blending until the food is properly
blended (Fig. u).
Caution
• Do not let the appliance blend for more than 30 seconds at a time. If you have
not finished blending after 30 seconds, release the button to stop blending
and wait a few seconds before you continue. If the main unit becomes hot, let
it cool down for a few minutes before you continue.
8
When you have finished blending, release the blending button (Fig. v).
9
Unplug the appliance.
10
Remove the blade unit. Be careful when you remove the blade unit as it
might be hot. Remove the blended food from the jar. If necessary, use the
spatula included with this appliance.
Reheating
A 120 ml storage pot is included with the appliance. Use the storage pot to reheat
the baby food you have made with the appliance.
Note
• A pack (SCF876) containing 2 storage pots with capacity of 120 ml and 240 ml
can be purchased separately in some markets.
• Always put previously blended food in the storage pot to reheat.
• Make sure that the sealing ring is assembled around the jar lid before
reheating, and that the flat side of the sealing ring is facing out.
1
Pour the appropriate amount of water into the water tank.
»
If you are using the 120 ml storage pot, pour 160 ml of water into the water
tank (i.e. to the water level marking for 10/15 min.) ; if you are using the
240 ml storage pot, pour water to the MAX water level marking indicated
on the side of the water tank or the MAX water level indication in the
water tank.
2
Put the water tank lid on the water tank and turn the lid clockwise to lock it
securely in place (Fig. f).
When the water tank lid is locked correctly in place, the
»
water tank lid will line up with the
3
Take the blade unit out of the jar (Fig. w).
4
Flip the storage pot over and place it onto the blade unit holder in the jar
(Fig. x).
5
Place the jar lid on the jar and turn it clockwise to close it securely (fig. y).
icon on the main unit.
icon on the water tank.
ENGLISH
17
icon on
icon on the

Publicité

Table des Matières

Dépannage

loading

Table des Matières