Getting Started - Nike HRM Triax 100 Digital Mode D'emploi

HRM100.English.US 7/17/01
4
We've tried to make this watch as easy as possible to use. Great care has
been taken to make the button functions consistent and clear. Even if you
don't read the whole manual, you should be able to work your watch if you
understand, in general, how the buttons work.
BUTTON FUNCTIONS, LEFT SIDE
ADJUST/RESET
Think of ADJUST/RESET as the button to use when you want to adjust, set
or reset something. For example, if you want to adjust the time, or reset
the chronograph. This button is a little different than the other buttons
because you usually have to press and hold it for a few seconds. This is so
you don't accidentally reset or adjust something.
MODE/NEXT
The MODE/NEXT button will normally move you to the next mode. When
you are making adjustments or setting something, the MODE/NEXT button
will move you to the next adjustable element.
ADJUST/RESET
MODE/NEXT
10:05 AM Page 4

GETTING STARTED

START/LAP
STOP
ELECTROLITE
BUTTON FUNCTIONS, RIGHT SIDE
The buttons on the right hand side of the watch have more functions than the
buttons on the left side. For that reason we've included all the details for quick
reference.
START/LAP
You can think of the START/LAP button as the "go", "plus," or "move forward"
button. It also functions as an on/off switch in some modes.
• In TIME mode, press to turn the chime on and off.
• In CHRON mode, press to start the chronograph and mark lap completion.
• In TIMER mode, press to start the countdown timer.
• In PULSE mode, press to view time of day.
• In GRAPH mode, press to move forward through the list of data points.
• In DATA mode, press to move through the list of data points for each run.
• In ALARM mode, press to turn the alarm on and off.
• When making adjustments, press to advance the blinking element.
STOP
The STOP button is the opposite of the START/LAP button. Think of it as the
"stop," "minus," or "go backwards" button. This button will also allow you to
alternate selections in some modes.
• In TIME mode, press and hold to select time zone 1 or 2.
• In CHRON mode, press to stop the chronograph and save run data to memory.
• In TIMER mode, press to stop the countdown timer.
• In PULSE mode, press to select zone 1 or 2.
• In GRAPH mode, press to move backwards through the list of data points.
• In ALARM mode, press to select alarm 1 or 2.
• In DATA mode, press to select run number.
• When making adjustments, press to reverse the blinking element.
ELECTROLITE BUTTON
The ELECTROLITE button is used to turn on the light.
If you press and hold the ELECTROLITE button, you can make the light come on
at the press of any button. It's great for night use. We call it auto-Electrolite.
5