Wifi Connection - BluMill MT-710 Mode D'emploi

16
EN
FAQ
Please install the right brush in the machine's right bottom mounting port, the left brush in the left
bottom mounting port and make sure that the two side brushes are in place.
What should I do if the robot does not work on my carpet?
We suggest that you do not use the robot to clean the carpet and instead set a boundary
around the carpet with the app.
What should I do if the vacuum cleaner is not vacuuming at full strength?
First of all check whether the dustbin is full and the robot is fully charged. If this is the case you
can try to switch it to a higher mode. In the case of persistent dust and debris try using the Spot
Cleaning Mode.
What should I do if the robot cannot find the charging dock?
The charging dock should be placed against the wall with at least 1 meter of clearance on each
side and 2 meters at the front. Sometimes you will need to put the robot back manually.
What should I do if the remote control does not work?
The remote control has an effective operating distance of 5 meters. Please make sure that
1.
the remote control is pointed at the main unit.
2. Replace the battery with a new one if it runs out of power.
Make sure the main unit's power switch is turned on and has sufficient power to operate.
3.
4.
Wipe the infrared emitter of the remote control and the infrared receiver of the main unit
with a clean towel.
Why does the main unit return to the charging dock after cleaning?
The main unit operates for variable periods depending on the complexity of the room, the
amount of dust and debris and the cleaning mode.

WiFi Connection

Scan the QR code or search for 'Smart Life' and download the App.
1.
2. Once the App has been installed, please follow the App instructions to register an account and
login.
3. Open the APP and click {add device}, {Small Home App }, {Robot Vacuum}.
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 16 2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 16 23-08-2021 10:02 23-08-2021 10:02