BluMill MT-710 Mode D'emploi page 15

If you are not going to use the product for a long time, please remove the battery and keep it in a
safe place. If the battery leaks, remove it and wipe the battery compartment clean.
This product uses a long-life battery and does not need to be replaced frequently. If you do need to
replace it, you can contact our company's after-sales service.
Alarms
Cause of Issue
Side brush
Fan abnormality
Roller brush
No dustbin inside
Failure of surface
detection
Stuck
Low battery
Charging abnormality
Gyroscope fail
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 15 2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 15
Display light
Red light on
Red light on
Red light on
Red light on
Red light flashing
Red light flashing
Red light flashing
Red light flashing
Red light flashing
APP content
Please check whether
side brushes are
jammed.
Motor cooling error.
Please check whether
roller brush is jammed.
Please check whether
dustbin is installed
correctly.
Please check whether
wheels are on the
floor.
Please help me, I'm
stuck.
Battery low, please
recharge me.
Please turn on the
power switch in order
to charge.
Navigation failure,
please restart me.
15
Solution
Clean side brush.
Please wait an hour
before using.
Clean roller brush.
Please check whether
dustbin is in position.
Clean the surface de-
tector and make sure
I'm not lifted up.
Please take me to an
open space.
Manually move the
cleaner back to the
charging dock for
recharging.
Please turn on the
power switch in order
to charge.
Turn on the switch
again.
23-08-2021 10:02 23-08-2021 10:02
EN