BluMill MT-710 Mode D'emploi page 11

Suction Power Setting
Press the 'Turbo' button on the remote control to select this
mode. There are three modes of suction power (Max/Standard/
Low). The Standard mode can be used for daily cleaning, while
the Max mode will increase the suction power and the Low mode
will reduce the noise.
The Low suction mode can be used to clean wooden floors and
tiled floors, the Standard mode can be used for everyday house-
hold cleaning and the Max mode can be used to clean rugs.
Roller Brush Assembly and Cleaning
Remove the roller brush cover plate, remove the roller brush, cut off the hair wrapped around it and
then use the cleaning brush to clean it.
Installing the roller brush assembly: take out the vacuum assembly first, install the roller brush, put
the cover back on and press it to lock.
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 11 2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 11
11
EN
23-08-2021 10:02 23-08-2021 10:02