BluMill MT-710 Mode D'emploi page 14

14
EN
Water Tank Assembly
Cleaning the mopping cloth
1. Remove: When mopping is completed, remove the water tank assembly and remove the water
permeable mopping cloth.
2. Maintenance: Rinse and dry the mopping cloth.
Remove: After mopping the floor, remove the water tank assembly and the water permeable
3.
cloth and pour off the remaining water in the water reservoir.
Side Brushes
Cleaning the Side Brushes
Pull out the side brush and wipe it with a clean cloth.
Other Assembly
Clean the universal wheel to reduce the amount of entangled hair.
Clear the sensor to maintain its sensitivity.
Use a dry cloth to clean the charging poles on the bottom of the main unit or the charging dock.
2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 14 2021-08-11 OCG BluMill Robot Stofzuiger ManualV01.indd 14
Maintenance: Rinse the reservoir and allow it to dry.
23-08-2021 10:02 23-08-2021 10:02