Functional Description - Makita DML809 Manuel D'instruction

FUNCTIONAL DESCRIPTION

CAUTION:
• Always be sure that the appliance is switched off,
unplugged, and the battery cartridge is removed
before adjusting or checking function on the
appliance.
Use with battery:
Installing or removing battery cartridge
CAUTION:
• Always unplug before installing or removing of the
battery cartridge.
• Only use genuine Makita lithium-ion batteries. Use
of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causing fires, personal injury and damage. It will
also void the Makita warranty for the Makita tool and
charger.
• Hold the appliance and the battery cartridge firmly
when installing or removing battery cartridge.
Failure to hold the appliance and the battery cartridge
firmly may cause them to slip off your hands and
result in damage to the appliance and battery
cartridge and a personal injury.
• Be careful not to trap finger (s) between the appliance
and battery cartridge when loading battery cartridge
as well as between the appliance and the battery
cover when closing the battery cover.
NOTE:
Up to two battery cartridges can be installed, although
the appliance uses one battery cartridge for operation.
To install the battery cartridge, release the cover lock,
and open the battery cover. (Fig. 1)
Insert the battery cartridge. Align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper side of the button, it is not locked completely.
Then close the battery cover. (Fig. 2)
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
CAUTION:
• Always install the battery cartridge fully until the red
indicator cannot be seen. If not, it may accidentally
fall out of the appliance, causing injury to you or
someone around you.
• Do not install the battery cartridge forcibly. If the
cartridge does not slide in easily, it is not being
inserted correctly.
Indicating the remaining battery capacity
(Fig. 3)
(Only for battery cartridges with the indicator)
Press the check button on the battery cartridge to
indicate the remaining battery capacity. The indicator
lamps light up for few seconds.
Indicator lamps
Lighted Off
NOTE:
• Depending on the conditions of use and the ambient
temperature, the indication may differ slightly from
the actual capacity.
Use of non-genuine Makita batteries, or batteries that
have been altered, will void the Makita warranty for the
Makita appliance and charger.
7 English
Remaining capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the battery.
The battery may have
malfunctioned.