INOXPAN S.L.
30
Before carrying out any maintenance, servicing or repairs, make sure of the following:
EN – MANITENANCE
-Electrical power is disconnected (Circuit breaker or differential).
-Fan blades are completely stationary.
-Follow personal safety regulations!
Inadequate maintenance of the hood filter systems (See hood user manual) can result in
an excessive accumulation of grease on the motor blades, putting them out of balance and
causing malfunction or abnormal noises.
The motor blades are maintenance-free and, if necessary, should only be repaired by
specialised and authorised personnel. Do not clean with a pressure jet cleaning system.
Make sure that any balance weights are not displaced and that the blades are not
deformed. In case of motor malfunction, contact the Pando official technical service.
Technical assistance service: 902 41 55 10
Fax. 93 757 96 53 / E-mail:
divisiontecnica@pando.es
VERY IMPORTANT: The motor must remain accessible for maintenance or possible
repairs to be carried out by the Technical Assistance Service. Access to the motor for
maintenance or repair must be safe and non-hazardous for the Technicians. If access and
disassembly are seen to pose a risk for personnel, Pando reserves the right to refuse to
repair the equipment until the conditions are appropriate for working. Therefore, to avoid
future maintenance problems, we recommend to bear this in mind when making the
installation. For further information or clarification, please contact your Distributor or
contact directly Pando's Technical Division for Hoods.