argenta
proslide telescopic
®
2. Follow the steps in the manual for 2 doors
(see page 16).
3. On the rear 3rd door panel, a long and
short pulley must be fitted.
Mount the telescopic connector under the
short pulley onto the second door panel with 2x
DIN 933 M5 x 12.
4. Screw the telescopic connector for 3 doors
under the long pulley on the third door
panel to make it hold the 2nd door panel
in place.
The bracket for the final position is connected to
the belt for the third door panel.
2. Führen Sie die Schritte wie in der Anleitung
für 2 Türen aus (siehe Seite 16).
3. Auf dem hintersten 3. Türblatt wird auch
ein langes und ein kurzes Umlenkrad
montiert.
Montieren Sie den teleskopischen Verbinder unter
dem kurzen Umlenkrad auf das zweite Türblatt mit
2x DIN 933 M5 x 12.
4. Schrauben Sie den teleskopischen
Verbinder für 3 Türen unten an das lange
Umlenkrad auf das 3. Türblatt, sodass dies
das 2. Türblatt festhält.
Der Bügel für die Endposition wird mit dem
Riemen des 3 Türblatts verbunden.
27