Forced receiving
To force the clock to synchronize, press and hold the forced
reception button for ± 3 seconds. The current time is stored in
memory and all hands will start moving towards 12:00. The clock
attempts to synchronize with the master clock.
When synchronization is successful, the hands will move towards
the correct time. If it fails however, the hands will move towards
the time that was memorized.
Reset
To reset the time and memory, use a piece of metal (e.g. a blank
paperclip) to short circuit the two metal reset pins.
All hands will move to the 12:00 position and the memory is
cleared. The clock will attempt to synchronize to the master clock.
8.
Battery
Insert a new 1.5 V AA battery in the battery compartment in
accordance with the polarity markings inside the battery
compartment.
Warning: Do not puncture batteries or throw them in
fire as they may explode. Do not attempt to recharge
non-rechargeable batteries (alkaline). Dispose of
batteries in accordance with local regulations. Keep
batteries away from children.
9.
Cleaning and Maintenance
Wipe the device regularly with a moist, lint-free cloth.
Do not use alcohol or solvents.
10. Technical Specifications
dimensions
dial ................................................................. Ø 26 cm
clock ......................................................... Ø 30 x 4 cm
weight ................................................................ ± 650 g
V. 01 – 29/02/2016
WC30D2
6
©Velleman nv