Others; Troubleshooting - Sony VPL-HS20 Mode D'emploi

Masquer les pouces Voir aussi pour VPL-HS20:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Others

This section describes how to solve the
problems, how to replace a lamp and air
filter, etc.

Troubleshooting

Power
c Wait for about one minute
The power is not
turned on.
before turning on the power.
(1 page 27)
c Close the lamp cover securely.
(1 page 62)
c Close the air filter cover
securely. (1 page 63)
Picture
c Check that the proper
No picture.
connections have been made.
(1 page 13)
c Select the input source correctly
using the INPUT button.
(1 page 26)
c Set the computer signal to output
from an external monitor.
c Set the computer signal to output
only to an external monitor.
No picture. (cont.)
c Select "Computer",
"Component" or "Video GBR"
for "Input-A Signal Sel" in the
SET SETTING
according to the input signal.
(1 page 34)
c Select "Computer",
The picture from the PJ
MULTI connector is
"Component" or "Video GBR"
colored strange.
for "Input-A Signal Sel" in the
SET SETTING
according to the input signal.
(1 page 34)
c Adjust the picture in the "Adjust
Color balance is
incorrect.
Picture ..." of the PICTURE
SETTING
(1 page 32).
c Set "Color System" in the SET
SETTING
the color system being input.
(1 page 34)
The picture is too dark. c Adjust the contrast or brightness
in the "Adjust Picture ..." of the
PICTURE SETTING
properly. (1 page 32)
The picture is not clear. c Adjust the focus with the
FOCUS +/–. (1 page 27)
c Condensation has occurred on
the lens. Leave the projector for
about two hours with the power
on.
c Adjust "Dot Phase" for "Adjust
The picture flickers.
Signal..." in the INPUT
SETTING
(1 page 33)
Sound
c Sound can be heard only when
No sound.
an MPEG1 format movie picture
of the "Memory Stick" is
played. (1 page 47)
c Adjust "Volume" in the
PICTURE SETTING
menu, or press VOLUME + on
the remote control.
On-screen display
c Set "Status" in the MENU
On-screen display does
not appear.
SETTING
(1 page 35)
Remote control
c Batteries could be weak.
The remote control
does not work.
Replace with new batteries. (1
page 6)
c Insert the batteries with correct
polarities. (1 page 6)
menu
menu
menu
menu to match
menu
menu properly.
menu to "On."
59
Troubleshooting
GB

Publicité

Table des Matières

Dépannage

loading

Table des Matières