Sony VPL-HS20 Mode D'emploi page 34

Item
V Position
Title Area
Note
For input signals from the DVI and HDMI connector, "Dot
Phase," "H size" and "Shift" are not adjustable.
34
Menu Lists
GB
Description
Adjusts the vertical position of the picture
in wide screen mode. As the setting
increases, the picture moves up. As the
setting decreases, the picture moves
down.
Note
This item is adjustable only when "Zoom" or
"Subtitle" is selected.
Adjusts the subtitle area. As the setting
increases, the subtitle area moves up. As
the setting decreases, the subtitle area
moves down.
Note
This item is adjustable only when "Subtitle" is
selected.
SET SETTING
Item Description
Smart APA With this item set to On, the APA function
works automatically for a signal input from
a computer so that the picture can be seen
clearly. You can also activate the APA
function by pressing the APA button on the
remote control.
Tip
The APA (Auto Pixel Alignment) automatically
adjusts the input signal from a computer so that
the picture can be seen clearly.
Auto Input Set to On when an optional Interface Unit
Search such as the IFU-HS1 is connected to the PJ
MULTI connector on the projector.
Input-A Signal Selects the signal input from the equipment
Sel. by selecting "Input-A" with the INPUT
button.
Computer: Inputs the signal from a
computer.
Component: Inputs the component or
progressive component signal from a
DVD player, digital tuner, etc.
Video GBR: Inputs the signal from a TV
game or HDTV broadcast.
DVI Signal Selects the signal input from the equipment
Sel. by selecting "Digital" with the INPUT
button.
Computer: Inputs the signal from a
computer.
Video GBR: Inputs the signal from a
digital tuner, etc.
Note
Before you change the "DVI Signal Sel." setting,
disconnect the DVI cable and turn off the digital
tuner, etc.
Color System Select the color system of the input signal.
Auto: Selects the color system of the input
signal automatically from among NTSC,
PAL, SECAM, NTSC
PAL-N.
"NTSC "–"PAL-N": Sets the color
3. 58
system to the selected system manually.
Power Saving When set to On, the POWER SAVING
indicator lights. The projector goes into
power saving mode if no signal is input for
10 minutes, and the lamp goes out and the
cooling fan keeps running. In power saving
mode, no button functions for the first 60
seconds. It is cancelled when a signal is
input or any button is pressed. If you do not
set the projector to power saving mode,
select Off.
Illumination Turns on the illumination on the top panel
of the projector when set to On. It turns off
when set to Off.
, PAL-M or
4.43