JVC KW-R900BT Manuel D'instructions page 24

Sound adjustments
Setting "My Sound EQ"
My Sound EQ lets you customize the sound through five steps involving different types of musical
instruments. Your adjustments are stored in SOUND1/2/3 and can be easily selected via the EQ button.
To set "My Sound EQ" with default music
1
(Hold)
2 Select "Default Music".
Default Music: Sample music pre-stored in the
unit.
Optional Music*: Sample music of various genres
stored in the connected USB device.
* Refer to "To set "My Sound EQ" with Optional
music" .
3 Customize sound level for each step
(instrument).
Select step
(instrument)
0
Step 1
0
Step 2
0
Step 3
0
Step 4
0
Step 5
4 Check the adjustment results.
24 | ENGLISH
Sound
Adjust the level
Step 1: Adjust the overall
sound level.
Step 2: Adjust low
frequency sound level. (e.g.
Bass)
Step 3: Adjust middle
frequency sound level. (e.g.
Piano)
Step 4: Adjust middle-high
frequency sound level. (e.g.
Brass)
Step 5: Adjust high
frequency sound level. (e.g.
Cymbal)
Result
+6
Step 1
You can also compare the results with a flat EQ.
Result
5 Confirm the adjustments.
6 Select and store into <SOUND 1/2/3>.
The adjustments are stored and <SOUND 1/2/3>
is activated.
To store another sound mode, repeat steps 1
to 6.
To set "My Sound EQ" with
Optional music
1 Visit the following JVC website: <http://
www3.jvckenwood.com/english/car/
index.html> (English website only).
2 Download your preferred music sample
(<.jms> files).
3 Store the <.jms> files in a USB device.
4 Connect the USB device to a USB terminal.
5 Follow steps 1 through 6 in "To set "My
Sound EQ" with default music" whilst
selecting <Optional Music> in step 2.
"No Optional Music File" appears if there are no
<.jms> file in the root folder or if no USB device
attached.
Store <.jms> files in only one of the USB
devices if two USB devices are connected at
the same time.
"Error" appears if the file is unreadable.
Flat