Electrical Characteristics; Materials Table - SIKA induQ VMI Série Notice D'utilisation

— Series VMI
Type

Electrical characteristics

Supply voltage
Current consumption
Electrical connection
Degree of protection
(EN 60529)
Process variables
Medium to measure:
- Conductivity
- Temperature
Ambient temperature
Nominal diameter
Nominal pressure
Process connection
* The maximum ambient temperature depends on the temperature of the medium and the wiring of
the VMI.

9.2 Materials table

Component
Housing
Measuring tube
Electrodes
Gaskets
Process connections
Technical changes reserved
VMI02
12...24 VDC (±10 %)
for analogue output 0...10 V min. 16 VDC
IP 65 and IP67 (with attached coupling socket)
DN 2
G¼-ISO 228 male
EPDM • FKM (optional)
VMI07
≤ 150 mA
5-pin-plug M12x1
Water and other conductive liquids
> 50 μS/cm
-20...90 °C
-10...T °C ( § 9.3)*
max
DN 7
PN 16
G½ - ISO 228 G½ - ISO 228 male
male • G¾ - ISO 228
Material
Aluminium die casting
PEEK-GF30
Stainless steel 1.4571
Stainless steel 1.4571
Technical data
VMI10 VMI20
24 VDC (±10%)
DN 10 DN 20
G1 - ISO 228
male
component
male
Wetted
X
X
X
X
- 37 -