Wirings - SIKA induQ VMI Série Notice D'utilisation

Electrical connection

5.1 Wirings

Pinout
The pinout differs according to the chosen configuration of the device.
M12x1
 Connect the connecting cable according to your version and the pinout on the type plate.
Supply voltage
VMI with frequency output
Push-Pull
*1: Push-Pull switching outputs of several VMI may not be connected in parallel.
*2: Recommendation Pull-Up / Pull-Down resistance R
Use of frequency and analogue output
Push-Pull
Recommendation for resistance R
- 32 -
Possible pinout:
Pin 1: +U
B
Pin 2: d. n. c. (do not connect) / Analogue U/I
Pin 3: GND
Pin 4: Frequency
Pin 5: n. c. (not connected)
NPN Open Collector
NPN Open Collector
~5 kΩ
L
PNP Open Collector
~5 kΩ
L
PNP Open Collector
© SIKA • Ba_VMI • 12/2020
— Series VMI