Special Treatments; Signal Function - exonda S32 Mode D'emploi

GB
38
9.8

Special treatments

For all treatments, it is possible to carry out partial treatments by switching the
upper and lower heating heaters on or off. This is performed by pressing the
button HEATING HEATER GROUP SELECTION in the following way:
• Press:
only the lower heating heaters are on
• press again:
only the upper heating heaters are on
• press again:
all heating segments are on
All heating segments are on at the start of each new treatment.
9.9

Signal function

The end of a treatment is signaled visually and audibly by:
- the time display, which flashes when there are 3 minutes remaining.
- 10 audible signals at the end of the heat treatment.
Operating principles, model S33