Location Of Controls; Headphones Connection - LEXIBOOK RCD200TS Mode D'emploi

LOCATION OF CONTROLS

1. CD door
2. Speaker
3. LCD screen
4. "Power on" indicator
5. Headphones jack
6. Function selector CD/AUX- POWER OFF
7. Volume control knob
8. PROG. (Program) button
9. Repeat button
10. Stop button
11. Play/Pause button
12. F.FWD (fast forward)
13. REW (rewind)
14. AUX IN jack

HEADPHONES CONNECTION

Plug any normal headphones (not included) with a 3.5mm jack plug into the
headphones jack located at the back of the unit. When the headphones are in
use, the speakers are turned off.
CAUTION: Too high volume, especially when using headphones, can
damage your hearing. For this reason, please turn the volume down before
connecting the headphones.
Play a CD
1. Press the top of the CD door to open the CD compartment. Carefully place
a disc on the centre spindle with the printed label side facing up.
2. Close the CD door and slide the function selector to the CD position to turn
the unit on. The "Power on" indicator will light up and the LCD display will
show the total number of tracks on the disc.
3. Press the Play/Pause button
track.
4. Use the volume control knob to set the sound level.
5. To suspend playing, press the Play/Pause button
playing, press Play/Pause
6. To stop playing, press the Stop button
7. To switch off the unit, slide the function selector to the POWER OFF
position.
F.FWD / REW buttons
1. When the CD is stopped, to play your favourite track directly, locate the
desired track using the F.FWD
Pause .
CD OPERATION
. The CD will start playing from the first
once again.
.
or REW buttons and press Play/
16 16
again. To resume