Uninstalling The Radio; Unlocking The Mtm800 Enhanced; Locking/Unlocking The Keypad; Automatic Keylock - Motorola MTM800 Enhanced Guide D'utilisation

Uninstalling the Radio

Unlocking the MTM800 Enhanced

Your MTM800 Enhanced may be locked at power up.
To unlock the MTM800 Enhanced after powering on, enter the code
at the prompt. The MTM800 Enhanced enters the default Home
display.
The unlock code is originally set to 0000. Your Service Provider may
change this number before you receive your terminal.

Locking/Unlocking the Keypad

To prevent accidental key/button presses:
Press Menu and
unlock. Service Provider can choose the notification for the Keypad
lock and if to lock the PTT.

Automatic Keylock

This feature locks the keypad automatically after not using it for a
predefined time. To turn it on/off or to set the delay go to Menu >
Security > Keylock Setup.
Keypad Lock on Startup
The user can set the Keylock at the start up of the terminal. To turn it
on / off go to Menu > Security > Keylock > Start Locked.
28
OPTION 1:
Before disconnecting the 13.2V main power
supply from the radio:
1. Switch off the radio.
2. Wait for a minimum of 4 seconds after the radio
Off Switch is released.
Disconnect the 13.2V main power supply.
OPTION 2:
Turn off the main power supply WITHOUT
switching OFF the radio.
to lock the keypad. Press again Menu to