Cleaning Instructions; Fault - Ndustrio 091CP1E Manuel D'utilisation Et D'installation

CLEANING INSTRUCTIONS

Since the appliance is used for preparing foods for
human consumption, special care must be paid to
everything relating to hygiene, and the appliance
and the entire surrounding environment must con-
stantly be kept clean
Important
Before starting any cleaning procedure,
disconnect the electricity supply using the
circuit-breaker and allow the appliance to
cool.
The precautions which follow are also important.
1 - Clean all parts of the appliance with warm wa-
ter, food-approved detergents and non-abra-
sive materials only.
2 - Thoroughly clean all parts which come into di-
rect or indirect contact with foods and all sur-
rounding areas.
3 - After use, clean the accessories with a suitable
grease-remover product. If possible, wash in
the dishwasher.
TROUBLESHOOTING
The appliance has been tested before being put
into service.
The information provided below is intended to as-
sist in the identification and correction of any anom-
alies and malfunctions which might occur during
use.
Faults
The heating elements do not
come on
Never use products containing substances
harmful or hazardous for health (solvents, pe-
troleum spirits, etc.).
4 - Rinse surfaces with drinking water and dry.
5 - Pressurised water jets may only be used on ex-
ternal parts.
6 - Take special care not to damage stainless steel
surfaces. In particular, avoid the use of corro-
sive products and do not use abrasive materials
or sharp tools.
7 - Remove food residues immediately before they
set.
8 - Remove the limescale deposits which may form
on some of the appliance's surfaces.

FAULT

The user can solve some of these problems him-
self, but for others specific technical knowledge or
skill is required, and so they must only be carried
out by qualified staff with recognised experience ac-
quired in the specific sector of operation.
Causes
Electrical connection not made
correctly
Safety thermostat tripped
Switch faulty
- 11 -
Caution - warning
Check the connection of
the electrical wires
Carry out the appliance
reset (see page 9)
Replace the switch
Important
Contact the after-sales service
6
Remedies
English
IT
GB
DE
FR
ES