en - IMPORTANT SAFETY INSTRUCTIONS
– Dust container / fine dust container: only clean these
parts with water and a small amount of liquid dish soap,
then dry carefully.
– Fine dust filter: do not clean the inside of the fine dust
filter. Rinse the outside under running cold water. Do not
use soap. Do not use any sharp or pointed objects and
do not brush the fine dust filter. After cleaning, leave the
fine dust filter to dry for a minimum of 24 hours before
placing it back in the fine dust container.
– Pre-filter / filter frame: clean these parts under running
cold water. Do not use soap. Do not use any sharp or
pointed objects. Dry these parts carefully after cleaning.
Proper use
Do not use the vacuum cleaner without the dust con-
tainer, pre-filter, fine dust container and fine dust filter fit-
ted.
Do not vacuum up anything which has been burning or
smoking, e.g., cigarettes, ashes or hot ash, whether glow-
ing or apparently extinguished.
Do not use the vacuum cleaner to vacuum up any water,
liquid or damp dirt. Wait until any freshly cleaned or sham-
pooed rugs or carpets are completely dry before attempt-
ing to vacuum.
Do not use the vacuum cleaner to vacuum toner dust.
Toner, such as that used in printers and photocopiers, can
conduct electricity.
8